EN
.
44
Parameter no. 42
–
Reporting on time interval
This parameter is currently valid only for Active Energy Total Import/Export (kWh), Reactive
Energy Total (kvarh), Total Energy (kVAh)
•
Available configuration parameters (data type is 2 Byte DEC)
•
Default value 600 (600 seconds - 10 minutes)
•
0
–
reporting disabled
•
600-32535 = 600 (600 seconds
–
32535 seconds). Reporting enabled. Report is send
with the time interval set by entered value.
Note: Device is reporting only if there was a change of 0.1 in Energy
Note: In the future will be possible to measure and report also Active Energy on PH1, PH2 and
PH3.
Parameter no. 43
–
Other Values - Reporting on time interval
This parameter is valid only for Voltage (V of ph1, ph2, ph3), Current (A of ph1, ph2, ph3), Total
Power Factor, Total Reactive Power (var)
Available configuration parameters (data type is 2 Byte DEC)
•
Default value 600 (600 seconds - 10 minutes)
•
0
–
reporting disabled
•
600-32535 = 600 (600 seconds
–
32535 seconds). Reporting enabled. Report is send
with the time interval set by entered value.
•
Note: Device is reporting only if there was a change
