EN
.
20
The installation process, tested and approved by professional electricians, consists of the
following simple steps:
Step 1
–
Turn OFF the fuse:
•
To prevent electrical shock and/or equipment damage, disconnect electrical power at
the main fuse or circuit breaker before installation and maintenance.
•
Be aware that even if the circuit breaker is off, some voltage may remain in the wires
—
before proceeding with the installation, be sure no voltage is present in the wiring.
•
Take extra precautions to avoid accidentally turning the device on during installation.
Summary of Contents for ZMNHWD2
Page 10: ...EN 10 Remotely dim up to 4 LED bulbs or turn them ON OFF...
Page 16: ...EN 16 4 Package Contents Flush RGBW Dimmer Device Installation Manual...
Page 22: ...EN 22 After Qubino installation...
Page 23: ...EN 23 INSTALLATION EXAMPLE Controlling four halogen or LED lights...
