QUBINO Flush Shutter, User Manual

Page: 46 / 65

EN .
46
Pressing the push-button for less than 0,5 second (short press), which is connected to I1 (up),
initiates up movement.
Pressing the push-button for less than 0,5 second (short press), which is connected to I2
(down), initiates down movement.
If the Shutter is moving, any press (of any push-button) will stop the movement.
Keeping the push-button, connected to I1 (up), pressed for more than 0,5 second (long press)
initiates slats rotation (0 to 100%), until the push-button is released or rotation end position is
reached. The rotation time is defined by par.72
Keeping the push-button, connected to I2 (down), pressed for more than 0,5 second (long
press) initiates slats rotation (100 to 0%), until the push-button is released or rotation end
position is reached. The rotation time is defined by par.72
Manual operation for venetian blinds with toggle switch
(par. 71 set to 1 and par. 1 set to 0)
When toggle switch connected to I1 (up) is pressed initiates up movement, until the toggle
switch is released.
When toggle switch connected to I2 (down) is pressed initiates up movement, until the toggle
switch is released.
When the slats are on 100% and the quick press on UP is done the shutter move up
When the slats are on 0% and and the quick press on DOWN is done the shutter move down
Slats positioning
To reach maximum slats positioning precision when the shutter is stopped by push button,
gateway or when controlled by gateway will position settings the slats in below described
conditions perform additional movement
When the slats are set at any intermediate position and receive the commad for different
position the slats always perform movement to 100% first and then back to set position.
When shutter is moving DOWN the slats are at 0% position. When the limit switch is reached or
the shutter is stopped by push button or by Gateway the slats perform rotation to 100% an then
move to previous position (before they start moving)