Qubic System QS-617, User Manual

Page: 9 / 43

QS-617/625
1.2. BEFORE START
The safety of Qubic System users is the top priority. To protect users and bystanders
against injuries caused by mechanical parts movement and electrical connectivity, the
following instructions must be strictly performed.
WARNING
As with any mechanical device, the user is responsible for inspecting the condi-
tion of the machine prior to use and adhering to safe operating procedures.
Even though possibilities with QS-617/625 are broad, some things should be kept in mind
when the place for the rig is chosen. Motion Systems
DOES NOT approve exceeding or
ignoring any of these points and IS NOT responsible for malfunctions or failures that,
are the results of these actions.
■
Ensure that power supply in your facility meets requirements listed in sections 2.3
and 2.4.
■
DO NOT use the QS-617/625 on very soft or fragile surfaces like rubber, glass, or
foam.
■
Ensure that all QS-617/625 modules are mounted properly.
■
The QS-617/625 shall be anchored using minimum 8.8 grade anchoring bolts.
■
DO NOT mount the device in tight or cluttered spaces – remember that QS-617/625
moves and nothing should restrict its motion range.
■
Seatbelts and other harnesses should be mounted to parts of the motion rig that
move in the same way as the seat.
DO NOT attach them to any static part or ground.
■
Cables must not be stretched and should be kept in a way that prevents them from
getting under actuator or any part that can crush or tear them.
■
If you want to use the QS-617/625 in an unusual application, and you are not sure,
that the desired setup is feasible, please contact, the distributor/reseller.
■
Check if cables are mounted properly – they are not stretched or loosely connected
to the socket.
■
Check if there are no objects in the motion range of the platform.
■
Check that all elements are properly fixed.
■
Check if there are no sharp edges nearby.
■
Check if everyone around is aware of machine rapid movements.
■
Make sure that no one stands in the range of motion (minimum 1.5 m).
User Manual rev. 1.1 7