First steps
First dreams
Quax
®
First steps
First dreams
Quax
®
www
.quax.eu
51-121165
5. Use of the front wheels
Attach both the swivel wheels to the front axle.
In addition push each of the pins into the wheel
mountings. The swivel wheels are engaged as
soon as a clicking sound is heard.
6. Use of the rear wheels (air fi lled)
Insert the rear wheels into the wheel mount-
ing at the ends of the rear axle. Make sure that
the wheels are tightly connected to the chassis.
Depending on the version of your pushchair it
may be fi tted with infl ated wheels. Upon delivery
these are already pumped up to a pressure of 1
Bar, which guarantees optimum suspension.
Should the wheels have lost some pressure,
pump them up with a bicycle pump (max. 1 Bar).
7. Use of the swivel handle
Adjust the height of the pushing handle to your requirements. To do this release the white locking buttons
on the inner side of the handle. Once the handle is at the desired height push the buttons back into the
original position. Make sure that the locking buttons are securely engaged. The handle can be positioned
completely to the opposite side of the chassis. To do this, unlock the two sleeves below the locking buttons
by pulling them upwards simultaneously. Now swivel the handle to the opposite side.
The swivel wheels can be locked by pushing the locking bars, which are mounted on the front side of the
wheel mounting. In order to be able to lock the swivel wheels, they must be aligned in the direction of travel.
• When the locking bar is pushed upwards the wheel can be swivelled
• When the locking bar is pushed downwards the wheel is locked
To remove a swivel wheel squeeze the catch located above the wheel mounting, and pull the wheel out of
the mounting.
To remove a rear wheel, push the release button located on the axle, and simultaneously pull the wheel off.
Combiné landau et poussette
Pram-pushchair combination
Cochecito y sillita de paseo combinado
Gecombineerde kinder- en wandelwagen
Kombinierter Kinderwagen
29
