First steps
First dreams
Quax
®
First steps
First dreams
Quax
®
www
.quax.eu
35
4. Assembling the baby bed
Needed parts
: the leg parts
ES1
,
ES2
and
ES3,
both end panels
EB1
, both sides
EB2
and the bottom
EB3
Step 1
: Use both long crossbars
ES3
, both short crossbars
ES2
, eight eccentrics
A
, the four legs
ES1
,
eight connectors
B
, sixteen wooden dowels
C
and four leg sliders
D
Push two eccentrics (
A
) in the drillings on the inside of the crossbars (
ES2
and
ES3
). Tighten two wooden
dowels (
C
) in the holes on the ends of the crossbars. Fasten two connectors (
B
) in the drillings on the
inside of the legs (
ES1
). Push the leg sliders (
D
) in the drillings at the bottom of the legs. Follow below.
Step 2
: Use the parts of step
1
Push the legs (
ES1
) with their connectors into the holes and over the wooden dowels of short crossbars
(
ES2
). Tighten the eccentrics. Push the long crossbars (
ES3
) with their wooden dowels into the holes and
over the connectors of a leg frame. Tighten the eccentrics. Push the other leg frame with its connectors in
the drillings and on the wooden dowels of the long crossbars. Tighten the eccentrics.
INDIGO
54 01 47xxXL
Lit convertible 140x70 cm
Convertible bed 140x70 cm
Omvormbaar bed 140x70 cm
Konvertierbar Bett 140x70 cm