COCOON
54F01-0400xXL
Quax nv
Karel Picquélaan 84 B-9800 Deinze Belgium
T
T
0032 9 380 80 95 www.quax.eu -
E
E
38
Step 4.8
: Use the parts from step
4.
4 and step
4.5
, the construction from step
4.7
, sixteen wood screws
D
and six legs
M
.
Place the bottom (
4
) in front of the drillings in the end and intermediate sides. Push eight wood screws (
D
) into the holes
at the underside of the bottom and tighten them in the sides. Tighten the legs (
M
) in the bottom mounting plates. Place
the top (
5
) in front of the drillings in the end and intermediate sides. Push eight wood screws (
D
) into the holes at the up-
perside of the top and tighten them in the sides.
Step 4.9
: Use the construction from
step
4.8
, three backs
18
, fourteen panel
clamps
J
and forty-nine wood screws
I
.
Place the backs (
18
) in the cut-outs of the
top, bottom and end sides. Check if both
angular distances are the same. Con-
nect the back at the height of the inter-
mediate sides with the panel clamps (
J
).
Push a wood screw (
I
) into the clamps
and tighten in the intermediate sides. At-
tach the backs to the end sides, bottom
and top using thirty-
fi
ve wood screws (
I
).