COCOON
54F01-0400xXL
Quax nv
Karel Picquélaan 84 B-9800 Deinze Belgium
T
T
0032 9 380 80 95 www.quax.eu -
E
E
36
Step 4.4
: Use the top
5
,
four push systems
H
and
eight wood screws
I
.
Disassemble the push
systems (
H
) Place the
mounting plates with
the lip (
see red arrow
)
facing backward, on the
drillings at the bottom of
the top (
5
). Tighten each
mounting plate with two
wood screws (
I
). Push
the systems back onto
their holder.
Step 4.5
: Use the bot-
tom
4
, four mounting
plates
N
and twenty four
wood screws
O
.
Place the mounting
plates (
N
) on the dril-
lings at the underside of
the bottom (
4
). Push the
wood screws (
O
) into
the holes of the moun-
ting plates and tighten
them in the bottom.
Step 4.3
: Use the left intermediate side
3L
, four wooden do-
wels
E
, a slider
L
, nine wood screws
A
, two push systems
H
,
four wood screws
I
, two rod holders
S
, eight shelf supports
T
and four hinge mounting plates
R
Push two wooden dowels (
E
) into the drillings at the top and
bottom of the intermediate side (
3L
). Disassemble the slider
(
L
). Place the outer slider on the holes on the left side of the
intermediate side. Attach the slider with
fi
ve wood screws (
A
).
Note the detail. Disassemble the push systems (
H
) Place the
mounting plates with the lip (
see red arrow
) facing backward,
on the drillings above and under the slider. Attach the mounting
plate with two wood screws (
I
). Push the systems back onto
their holders. Push two shelf holders (
T
) into the drillings on
the right side of the intermediate side. Push six shelf holders
(
T
) into the drillings on the left side of the intermediate side.
Place the rod holders (
S
) on the drillings in the middle of the
left side of the intermediate panel. Attach the holder with two
wood screws (
A
). Push the four hinge mounting plates (
R
) into
the holes on the right side of the intermediate panel.
