Operation
38
6.5.5 Mounting the pump chamber
►
Disconnect the power supply to the pump.
►
Mount the pump chamber (QF5C Figure 9).
NOTE
–
You can turn the pump chamber (QF5C Figure 9) in 90° steps so
that the position of the connectors on the suction and pressure side fit
optimally in the machine. Hereby, also turn the clamping ring (QF5C, item 4
figure 9) so that the clamping ring screw (QF5C, item 9 figure 9) is
accessible.
Optimum emptying of the pump only exists in standard alignment (outlet
connector facing downwards), however.
►
Fasten the screws (1 / QF5C, item 8 Figure 9).
►
Fasten the clamping ring screw (2 / QF5C, item 9 Figure 9).
►
Fasten the locking screw (3 / PQ5A, item 3 Figure 8).
