background image

Page 4

 

Fig.2 

A: Drive Roller

 

 

B: 12V Motor

 

 

C: Connection Terminals (+ and -)

  D: 

Base 

Unit

  E: 

Drive 

Unit

  F: 

Gear 

Housing

 

Always ensure that you are close enough to engage the caravan’s handbrake when manoeuvring on uneven terrain and  

 

gradients/slopes in case of mechanical failure. Do not use the mover as a brake, when you have finished manoeuvring  

 

always engage the caravan’s handbrake. 

 

SAFETY FIRST! Ensure that there are no persons or obstructions in the vicinity of the caravan prior to testing. 

 

Please make sure you read the safety instructions very carefully and make sure that you follow these guidelines!

 

Make sure that the battery that supplies the mover is fully charged and in good condition.

 

Make sure that the caravan is free from the vehicle and the handbrake is on. Also make sure that the corner- 

 

 

steady feet are fully raised.

Engage both rollers as described in ‘Operation-Mover engagement’.  For the Quattro500 (Manual) this only needs to be done on 
one side of your caravan since the other side will automatically follow via the cross actuation bar. 

Turn on the Battery Power Isolation Switch (29).

Before operating the Mover, release the handbrake.

Store remote control in a safe place (out of reach of children or other unauthorised people.

The Remote Control handset (2) is powered by two ‘AA’ 1.5V batteries (refrain from using lower voltage rechargables), and is 
activated by double-pressing the button  (Fig.1C). Once activated the display will illuminate. If the handset has not been used 60 

seconds it will power off. Ensure before continuing that the control unit has power by turning on your isolation key. 

Fig.1 

 

A = Handset display

 

 

B = Directional thumb stick

 

 

C = Multi-function button

After the handset has completed powering on the following homescreen will shown on screen. Note if any icons are flashing this 

indicates an issue, or that the handset hasn’t connected to the control box. Ensure isolation key is turned on before powering on 
the handset, and allow up to 10 seconds for a connection to be established. 

 
 

Page 5

Operation - Remote Control Handset First Use

A

B

C

D

E

(A) Signal strength

 - Indicates signal strength between handset and control unit inside the 

carvan. 

(B) Mover engagement status 

- Circles touching indicates movers are engaged onto wheels.

 

 

 

           - Circles seperated indicates movers are disengaged.

(C) Leisure battery status 

- Indicates voltage level of leisure battery, for maximum perfor-

mance ensure battery is fully charged and showing 4 bars before operating mover.

(D) Handset battery status 

- Indicates handset battery level.

(E) Mover orientation 

- This shows the direction of travel of the caravan, when the thumb 

stick is moved the caravan will follow in this direction. By default the hitch is designated as 

the forward direction. At any time press the multi-function button (Fig.1C) to flip the caravan 

orientation, the rear of the caravan will then move forward when the thumb stick is moved 
upwards.

Caravan orientation flipped

QUATTRO500_ELECTRONICS_UM.indd   7

15/08/2019   16:47:54

Summary of Contents for QUATTRO500















Reviews: