Page 8
AWD - Front axle wiring
+
-
+
-
M3
M2
M2
+
-
A
B
Caravan Front
Fig.4
Positive Wire
Negative Wire
M3
B
B
M1
-
+
M1
AUTO MODEL
ONLY
AUTO MODEL
ONLY
M4
-
M4
+
ISOLATION KEY
Page 9
Error Code E5
Voltage low, although the system will continue to work again after 5 seconds. Possible causes are:
- Discharged or faulty battery. Ensure that the battery being used is in a good condition and fully charged. A load voltage of at least
12.7V is required for maximum performance.
- Connection issue between control box and motors. Make sure all connectors are securely attached, with a good quality crimp on
all wires.
- Faulty control box. If correcting the above does not fix the issue it is likely that the control unit has a fault and will need repair or
replacement.
Error Code E6
Low voltage limit exceeded, the possible causes are:
- Faulty battery that needs to be replaced.
- Faulty control box. If correcting the above does not fix the issue it is likely that the control unit has a fault and will need repair or
replacement.
In case of any doubt, please call your Quattro Caravan Mover supplier.
E
FUSE
QUATTRO500_ELECTRONICS_UM.indd 11
15/08/2019 16:47:54
