2
3
The CO2 is controlled
via the gas canister
regulator on the front
of the unit (see dia-
gram).
Use a large flathead
screwdriver or a 19mm
spanner to increase
the level of carbonation
in the water. Turn the
regulator by a half turn
in a clockwise direction.
To decrease the level of carbonation, turn the
regulator by a half turn in an counter-clockwise
direction.
Between adjustments,
you must run off sev-
eral glasses of spar-
kling water to see the
effects of the adjust-
ment. If the sparkling
function is spluttering,
there is too much gas in
the water. Reduce the
setting by one full turn
and try again.
TAP FUNCTIONS:
ADJUSTING THE CARBONATION OF
THE SPARKLING WATER
ADJUSTING CARBONATION - CHANGING CO2 CANISTER
CO
2
TAP FUNCTIONS:
SPARKLING WATER
CHANGING THE CO2 CANISTER
When the sparkling water tastes flat, it is nec-
essary to change the gas canister.
The integral CO2 gas canister is sited on the
left-hand side at the front of the unit (see dia-
gram opposite).
Please follow the instructions below to ensure
your CO2 canister is correctly installed:
1. To remove a canister, unscrew in a counter-
clockwise direction.
2. Locate the thread on the regulator where the
gas canister will connect.
3. Carefully present the canister, ensuring the
canister is supported.
4. Rotate the canister in a clockwise direction,
being careful not to cross thread the regulator.
**see next page illustration.
FRONT VIEW
Counter-Clockwise
CO
2
REGULATOR THREAD
CO
2
For your safety and to prevent accidental use,
the boiling function has a safety switch that
needs to be released to activate the flow of
boiling water.
1. Press and release boiling
(red)
.
2. Dispense hot water in 6 secs and automati-
cally stop.
3. To turn this function off, press and release
boiling
(red)
again. To end this function before
the 6 second timer ends, press and release any
button.
QUATREAU SMART TAP
QUATREAU SMART TAP
BOILING WATER
CHILLED WATER AND
SPARKLING WATER
DIGITAL BUTTON
DIGITAL BUTTON
To activate chilled water:
1. Press and release chilled (middle blue button).
2. This will dispense chilled water for 6 seconds
then automatically stop.
3. To end this function before the 6 second tim-
er ends, press and release any button.
To activate sparkling water
1. Press and release sparkling (Right Blue But-
ton).
2. This will dispense Sparkling water for 6 sec-
onds then automatically stop.
3. To end this function before the 6 second tim-
er ends, press and release any button.
SPARKLING WATER
SAFETY SEQUENCE - ACTIVATE CHILLED & SPARKLING - DIGITAL BUTTON
