4
CHANGING CO2 CANISTER
5. Rotate until you hear a hissing sound. This is
the gas being released from the canister. It is
important to keep screwing until you can no lon-
ger hear this hissing.
6. When the canister cannot be turned further,
it is safely connected. Do not turn the canister
any further, as this will damage the regulator.
7. Press the glass icon button and runoff an
amount of sparkling water to re-calibrate
the system.
FRONT VIEW
Clockwise
CO
2
FRONT VIEW
CO
2
NOTE:
While removing a canister,
it is important to support
its weight to avoid the can-
ister dropping on the floor.
When attaching a new gas canister, hand tight-
en the gas cylinder firmly but do not overtight-
en.
NOTE:
Check by listening that gas is not escaping.
The regulator has an internal opaque white-col-
ored seal that should stay firmly in place. Old-
er models have a black o-ring. If these are re-
moved or fall out, the gas will escape.
The regulators have two crosshead screws at-
taching the regulator to the front panel.
These are tightened during manufacture and
should be checked periodically at service inter-
vals, if they come loose gas will escape.
`
Distributed by: Global Water Solutions
USERMANUAL-QT553 - 07292021
© gws July 2021
Find out more at: www.Quatreau.com
