Quatech WLNG-AN-DP500 Series Reference Manual Download Page 56

Page: 56 / 120

Company Confidential

Quatech, Inc.

Airborne CLI Reference Manual

100-8081-100

put-cfg

Command

put-cfg

Arguments

user_config.txt | OEM_config.txt

Device Type

All

Default

none

Description

Will cause the device server to wait for an Xmodem file transfer of the configuration file from the host
device connected to the serial interface.

Once the download is complete it is necessary for the

save

command to be issued, this will cause the

configuration file to be stored to the device server.

There are two valid configuration files that may be down loaded:

user_config.txt

User configuration file. This file contains the user configuration
commands and parameters.

OEM_config.txt

OEM default configuration file. This contains the OEM default settings for
the device server. These settings are installed upon the issuing of a

factory reset command or hardware factory reset input.

It is required that the host use Xmodem 1K or Xmodem 1K-CRC.

This command is supported via the serial interface or a telnet session.

Summary of Contents for WLNG-AN-DP500 Series

























































































































Search results

Summary of Contents for WLNG-AN-DP500 Series

Reviews:

Related manuals for WLNG-AN-DP500 Series

Brands by name

Popular brands

Quatech WLNG-AN-DP500 Series, Reference Manual

Search results

Summary of Contents for WLNG-AN-DP500 Series

Reviews:

Related manuals for WLNG-AN-DP500 Series

Brands by name

Popular brands