Quatech WLNG-AN-DP500 Series Reference Manual Download Page 22

Page: 22 / 120

Company Confidential

Quatech, Inc.

Airborne CLI Reference Manual

100-8081-100

6.7

ASCHEX vs. Binary Values

Data can be sent to the Module as either binary data or a hexadecimal
representation of the actual data being transmitted.

When a LAN device or serial port Host issues a

pass

command, the data is

transmitted as binary data. By comparison, when the command

putget

putexpect

is issued, the

senddata

content must be encoded as ASCII

hexadecimal digit pairs. The data is translated across the Module and received
as an ASCII representation of the actual data. This is true whether the
transmission initiates from the LAN device or from the Host.

For example, the digits 31 correspond to the ASCII character 1. If you issue a

putget

putexpect

command with the

senddata

value of 314151, the

destination receives the ASCII characters

, and

6.8

Command Responses

The Module responds to CLI commands with a response indicating whether the
CLI command was executed successfully. All responses are terminated by

Multiline responses have each line terminated with

with the response

terminated by

After the Module executes a CLI command successfully, it returns the response:

OK<CR><LF>

Otherwise, it returns an error response. Error responses are returned in the
following general format:

Error 0xhhhh:

error text

In the response the aschex value is the error code. A summary of error code can
be found in section TBD.

Summary of Contents for WLNG-AN-DP500 Series

























































































































Search results

Summary of Contents for WLNG-AN-DP500 Series

Reviews:

Related manuals for WLNG-AN-DP500 Series

Brands by name

Popular brands

Quatech WLNG-AN-DP500 Series, Reference Manual

Search results

Summary of Contents for WLNG-AN-DP500 Series

Reviews:

Related manuals for WLNG-AN-DP500 Series

Brands by name

Popular brands