May/07
MN
5
7.
Press
Ctrl+E
to exit the BIOS.
8.
When asked
Are you sure to exit (Y/N)?
, press
Y
to exit and
reboot.
9.
Continue with FDISK and FORMAT steps as if you were
installing a conventional hard drive.
Manual configuration
1.
As the BIOS boots press
Ctrl+S
or
F4
when prompted to enter
the RAID BIOS.
2.
At the next screen select
Create RAID Set
, then press
Enter
.
3.
Select
RAID0
, then press
Enter
.
4.
Select
Manual configuration
then press
Enter
.
5.
Select chunk size from
8k
,
16k
,
32k
,
64k
or
128k
, then press
Enter
.
6.
Select the
first drive
, press
Enter
.
7.
Select the
second drive
, press
Enter
.
8.
Input the RAID size, press
Enter.
9.
When asked
Are You Sure(Y/N)?
, press
Y
to accept.
10.
Press
Ctrl+E
to exit the BIOS.
Summary of Contents for SATA2PX-100
Page 16: ...May 07 MN 16 ...
