2.2.2 Istructions for Installation
1. Turn off the PC and all peripherals.
2. Remove the cover.
3. Attach the ribbon cable to the drive unit. The ribbon is keyed,
therefore, there is only one possible way to insert the plugs into
the sockets.
4. Install the PCD2-F into an unused 3.5" drive bay using the four
mounting screws. The optional PCD2 adapter will be required
installation in a 5.25" drive bay. Follow the instructions on the
drive bay adapter for installation in the 5.25" drive bay.
5. Attach the ribbon cable to the drive unit's ISA bus interface card.
Again, the ribbon cable is keyed for proper insertion.
6. Find an empty ISA/AT (16-bit) bus slot for the card and remove
the empty card socket plate from the PC and retain the fastening
screw.
7. Insert the card into the empty slot, being careful to line up the
tabs with the sockets.
8. Fasten the card in place with the screw from step seven (7).
The hardware installation is now complete.
3.1 SOFTWARE INSTALLATION
The PCD2-F card drive includes a DOS PCMCIA card and socket
services library called Cardsoft, from Systemsoft . The PCD2-F also comes
with Cardview, a PCMCIA control and maintenance utility for Microsoft
Windows. PC Cards can easily be configured while in Microsoft
Windows since the PCD2-F works side by side with Cardsoft. Windows
95 does not require Cardsoft or Cardview.
Note: be sure to complete the hardware installation instructions of your
PCD2-F before proceeding with the software installation.
3.2 INSTALLATION FOR DOS AND WINDOWS 3.1x
1. Start the PC. Insert the Cardsoft diskette into drive A: or
drive B:.
2. Microsoft Windows users should start up Windows now f
rom
the program manager, select File, then Run and
__________________________________________________________________
4
Quatech Inc.
