Quatech USB-to-Serial Adapter User’s Manual
Installing the software
Installing under Windows 2000
Follow these steps to install the USB-to-Serial adapter under
Windows 2000.
Step
Procedure
Description
Step 1
Turn on the power to your computer
system.
This is the system in which the device is to
be installed.
Step 2
Plug the wide flat end of the USB cable
into the downstream connector.
This is the connector located on the back of
the computer of USB hub.
Step 3
Plug the square end of the USB cable into
the back of the USB-to-Serial adapter.
Windows tells you that it has found new
hardware and launches the Add New
Hardware Wizard. The Found new
hardware prompt displays.
Figure 6 - Windows 2000 Found new hardware prompt
Step
Procedure
Description
Step 4
Click the Next button.
The Search for or display drivers
prompt displays.
Figure 6 illustrates the
Windows 2000 Found new
hardware prompt. The Found
New Hardware Wizard
launches automatically when
you first plug in the USB-to-
Serial adapter.
Rev 1.01 (February 2007)
Page 7
