Airborne Control Center
Page
36
AirborneDirect™ Ethernet Bridge User's Guide
100-8007-141G
Quatech, Inc. Confidential
Wireless Security Settings
Wireless Security Mode
Enables or disables wireless security:
•
Disable
– Disable any security (
default
)
•
WEP64
– 64-bit key length (11 ASCII
characters)
•
WEP128
– 128-bit key length (26 ASCII
characters)
•
WPA-PSK -
WPA with preshared key.
Requires
preshared
key
•
WPA-LEAP
-
WPA with 802.1x (LEAP)
authentication.
Requires
LEAP
username
and
password
•
WPA-LEAP64
-
WPA with 802.1x (LEAP)
authentication, and using "WPA
Migration Mode" (static 64-bit WEP
key is used for broadcast and
multicast traffic)
•
WPA-LEAP128
-
WPA with 802.1x (LEAP)
authentication, and using "WPA
Migration Mode" (static 128-bit WEP
key is used for broadcast and
multicast traffic)
•
WPA-PSK64
-
WPA with preshared key, and
using "WPA Migration Mode" (static
64-bit WEP key is used for broadcast
and multicast traffic) Requires
preshared key.
•
WPA-PSK128
-
WPA with preshared key, and
using "WPA Migration Mode" (static
128-bit WEP key is used for broadcast
and multicast traffic) Requires
preshared key.
WPA Passphrase (Preshared
Key)
Configures the Pre-Shared Key used with WPA-PSK security.
The input range is 8 to 63 ASCII characters or 64 hex
characters. This key must match the key on the AP.
LEAP Username
Configures the WPA-LEAP username.
The LEAP username [1 to 32 characters] must match the
LEAP username assigned on the LEAP server. The LEAP
username cannot contain spaces.
