Quasonix TIMTER QSX-V Series, Installation And Operation Manual

Page: 87 / 112

TIMTER™ Multi-mode Digital Telemetry Transmitter
79 Quasonix, Inc.
Requirement Description
RE102 Radiated Emissions, Electric Field
RS101 Radiated Susceptibility, Magnetic Field
RS103 Radiated Susceptibility, Electric Field
Quasonix transmitters have been tested for compliance with these standards approximately annually since 2004.
However, such testing is only performed as part of a qualification program, and the test results are the exclusive
property of the customer who paid for them. If you need EMI testing on a particular part number, please contact
sales@quasonix.com for a quote.
6.4 Carrier Frequency Tuning
The carrier frequency is selectable in 0.5 MHz steps. Frequencies supported by TIMTER™ transmitters are listed in
Table 17.
Table 17: Carrier Frequencies (MHz)
Band ID
Code
Band Minimum
Freq
Maximum
Freq
Default Freq Tuning
Steps
Max
Power
A Lower S 2200.5 MHz 2300.5 MHz 2250.5 MHz 0.5 MHz 25 W
B Mid C and Euro Mid C 5091.0 MHz 5250.0 MHz 5120.0 MHz 0.5 MHz 20 W
C
C “Low”
4400.0 MHz 4950.0 MHz 4620.0 MHz 0.5 MHz 20 W
D C (with Mid C) 4400.0 MHz
and
5091.0 MHz
4950.0 MHz
and
5150.0 MHz
4620.0 MHz 0.5 MHz 20 W
E (all) L, S, C 1435.5 MHz
1750.0 MHz
2200.5 MHz
2300.5 MHz
4400.0 MHz
5091.0 MHz
5150.0 MHz
1534.5 MHz
1855.0 MHz
2300.5 MHz
2394.5 MHz
4950.0 MHz
5150.0 MHz
5250.0 MHz
2370.5 MHz 0.5 MHz 10 W
F S and C 2200.5 MHz
and
4400.0 MHz
2394.5 MHz
and
4950.0 MHz
2370.5 MHz 0.5 MHz 20 W
G Euro Mid C 5150.0 MHz 5250.0 MHz 5150.0 MHz 0.5 MHz 20 W
H L and C 1435.5 MHz
and
4400.0 MHz
1534.5 MHz
and
4950.0 MHz
1450.5 MHz 0.5 MHz 10 W