QTrack
™
Antenna System
32
Quasonix, Inc.
To set the transmit frequency and other parameters, select the settings (gear) button in the lower right corner for the
Tx Control window. The Transmitter window, Tx Settings tab is shown in Figure 42.
Figure 42: Transmitter Window, Tx Settings Tab
There are three tabs available on the Transmitter window: Tx Settings, Console, and Comm. Config.
•
TX Settings
–
Contains typical transmitters settings for Frequency, Modulation, and Variable Power.
Ensure the selected transmit frequency is in a different band than the desired receive band. The ACU will
not enable RF if this set the same as the receive band.
•
Console tab
–
Provides the serial interface to the transmitter
•
Comm. Config
–
Contains IP address information for the transmitter serial interface.
Do not modify these
parameters as they are critical for system operation
.
