COIL BALANCE menu item - SENSOR BALANCE
In each subparagraph, the projection of the unbalance vector
X (top line) and Y (bottom line) is displayed in graphical form,
as well as the unbalance range in millivolts (top line) and the
angle of the unbalance vector in degrees (bottom line) in
numerical form. The screens of all 3 points are identical, and
differ in the letter in the second line:
• "B"
- "Balance"
• "D"
- "Desired balance"
• "N"
- "No compensator"
Desired balance – value of the desired sensor balance level.
The amplitude and phase value are set to which the auto-
compensator needs to balance the sensor. Use the Up, Down
and Right, Left buttons to achieve the desired amplitude and
phase value.
For RC devices in Desiredbalance, you need to set the
following values: Do not ask why, just put 100-150 mV and
about -160, both vectors should be to the left, as in the photo
above
.
For other users, I recommend consulting the
manufacturer of your device.
Summary of Contents for ARM
Page 1: ...QUASAR user guide...
