Quasar Science 924-2301, Quick Start Manual

Page: 19 / 185

Status Lights
The Data and Wireless Status Lights can be various colors based on the connection type and status. Check that the light is in the correct wired and wireless
modes and that Status lights are enabled in the config.
Data Status Light
Solid LED – Data Received.
No Light – No Data Received or Status Lights turned off.
Blinking Data Light - Error with the data received.
Wireless Status Light
Solid LED – Connected to Wireless Device.
Slow Flashing – Light is paired with Wireless Device and connected, but
Transmitter is not receving data.
Fast Flashing – Light is connecting to Wireless Device or Lamp is paired with
Wireless Device but device not found.
No Light – Light is Not Paired with Wireless Device, Wireless Mode -> Off or
Status Lights turned off.
The Status LEDS can be disabled from the > Config MENU < Status LEDS >
The Status LEDs will always display while the display screen is active. If the Status LEDs are disabled they will turn off when the display screen turns off.
Rainbow 2
19
English