Quasar Science 924-2301, Quick Start Manual

Page: 12 / 185

Power Button: To turn the light on, press and hold for 1 second. To turn the light off, press and hold for 2 seconds. Double Tap the Power Button to Return to
the Main Screen. When on the Main Screen, single tap the Power Button to get to the Sub Status Screen. To change the power on mode, to energize with to turn on
when energized, without pressing the Power Button.
Output Button: Toggle the button to enable/disable the lamp output in manual mode operation. Users can change the color, intensity or effect of the light without
the changes affecting the environment before toggling the lamp back on. An Asterisk (*) appears in the top left corner of the screen whenever the Output Button is
not allowing lamp output.
Link Button: On CRMX: For RX, press and hold to unlink light. For TX, Single tap to send pairing signal. Double Tap to bring up Wireless Menu
Left / Minus Button: Decrease a value or navigate Left.
Right / Plus Button: Increase a value or navigate Right.
Enter / Save Button: Enter selection, Save Value.
Upgrade Port: USB-C Port for performing software updates with a USB-C Thumb Drive.
Rainbow 2
12