Section 3:
Loading Project Files
Page 14
PROJECT FILE LOAD
Next = PROCEED
Prev = RESTART
PROJECT FILE LOAD
WAITING FOR COMMAND
FROM COMPUTER
Before selecting
Connect
, insure the 2800 is connected to the computer and ready to receive the download. The
2800 is connected to the computer via serial communication cable, Quartech # 2136-10. To prepare the 2800 for
downloading the project file, hold down the
Enter
key while applying power to it.
The 2800 will display: Pressing the
Next
key will trigger this
screen:
Pressing the
Prev
key will cause the 2800 to
perform a warm boot which is just like re-powering.
If the 2800 is ready, then click the
Connect
button on the
Connect to the 2800
dialog.
The following dialog will display.
If this is the initial download then insure the
Send All Screens
and
Send Setup Information
boxes are both
checked. To initiate the project download click on the
Send
button. The
Send Status
bar graph will indicate the
download progress. If a project is modified, ScreenMaker 2000K allows you to send individual screens. To send an
individual screen deselect the
Send All Screens
box and click on the screen you want to send. To select multiple
screens hold down the
Ctrl
key on your computer keyboard while you select screens.
PM2800U3K Revision 4
