User Manual – Diamond 8 Plus
Master Control Unit
SWITCH OFF THE ELECTRICAL SUPPLY TO THE PUMP AND DISCONNECT THE
POWER CORD FROM THE MAIN SUPPLY BEFORE CLEANING AND INSPECTION
The casing of the pump is manufactured from ABS plastic. If soiled it can be wiped
down with a sodium hypochlorite solution to dilution of 1000ppm or any EPA
approved hospital grade disinfectant.
(Do not use phenol based cleaning
solution)
The air filter should also be cleaned and checked as often as possible at a
minimum of every six months. Air Filter can be removed by pinching center of the
filter and pulling outward from the back of the Therapy control unit.
Cleaning procedure for air filter.
1. Remove Air filter and Replace a new Filter.
2. Use a soft bristle brush to remove dust and
difficult dried-on soil.
(Do not use phenol based cleaning solutions)
(Switch off the electrical supply to the pump
and disconnect the power cord from the main
supply before cleaning and inspection)
