User Manual – Diamond 8 Plus
x.
Pressing MAX button will activate quick inflation to bring the mattress to a flat
surface for performing nursing tasks with maximum pressure. The pump is set to
default back to “ALTER” after 30 minutes of inflation.
After the mattress is fully
inflated, the caregiver can transfer the patient to the mattress
xi.
Push MAX again to release the fast inflation mode
Battery status:
Orange light will be illuminated if low battery. Green light will be flashing when
battery is in recharge.
Low Pressure:
Possible air leaks or loose tubing connection result in low pressure.
Lock Function:
Press the LOCK button for 3 seconds to unlock the face plate.
Static Function
:
Push the STATIC button and adjust the comfort control by pressing the SOFT/FIRM
button to achieve maximum patient comfort. On this mode the system provides only low
air loss therapy. Perform a hand check by placing hand under the patient’s buttocks
between the cells and foam. The patient should have at least 4 cm of clearance between
the buttocks and the bottom of the mattress.
Dynamic Function:
Push the alternate button to enable the 3:1 alternating function.
CPR Deflation
:
For quick mattress deflation disconnect the hose connector from the controller and
release the CPR quick deflation valve.
