User Manual – Diamond 8 Plus
Symbols Used
Class II Equipment
Refer to Accompanying Documents
Type BF Applied Part
Waste Disposal
Warning
1. Instructions for Proper Use
i.
Remove the existing mattress from the bed frame
ii.
Replace the standard mattress with mattress replacement system (orient
mattress so that the air tube is at the foot of the bed)
iii.
Secure straps beneath the mattress to the bed frame
iv.
Hang the control unit on the foot board of the bed frame
v.
Attach the air tube connectors to the socket on the left panel of the control unit
vi.
Verify that air hoses are not kinked under the mattress
vii.
Attach cover to mattress
viii.
Plug in the control unit and turn on the master power switch on the right side
panel (the STANDBY LED will illuminate)
ix.
Push the STANDBY/OPERATE button on the front panel (OPERATE LED
will now be illuminated and the control unit will be in operation)
