Quark-Elec application note
https://www.quark-elec.com
11 of 22
2015
V1.1
Figure 8 Rename and Register page
At this point, the QK-S001 should be paired with QK-W017 as device1.
The operator can repeat the above process for the remaining four T/H control terminals.
3 O
PERATION
Using the QK-W017 is simple and intuitive. When the gateway and control terminals have been
set up and paired they can be set individually to achieve the environmental conditions required.
Setting up is very straight forward and once the operator has input the required parameters, the
QK-W017 will automatically monitor up to five individual zones for temperature and humidity
and regulate them according to the relay settings which have been input to control connected
appliances. All functions can be overridden manually using the APPs without affecting the
original settings, or the settings can be adjusted so that the appliances can only be operated
manually. In addition operators can get a real-time temperature and humidity reading by clicking
on the zone name, without affecting the T/H settings.
3.1 Checking Terminals
The Operator can monitor Individual zones by clicking their zone/location zone name on the
‘Terminals Check’ page. This will display real-time information, instantly. The temperature will
still be logged at an interval set by the operator in the main data log.
