QK-AS07-N2K Manual
V 1.0
5 of 12
2021
2. Installation
2.1. Dimensions, Mounting and Location
AS07-N2K is designed to be securely positioned in an outdoor environment. The AS07-N2K should be
mounted to a strong and sturdy location. The AS07-N2K has a standard G 3/4 screw thread and can be
installed using the corresponding antenna base (included) or a G ¾ Base of your choice.
Mount the AS07-N2K in a:
•
Sturdy outdoor location,
with ‘line of sight’ to the sky
•
As close to the vehicle/boat’s center of gravity as possible.
Avoid
mounting too high up, to ensure a more accurate compass reading
•
Minimum 0.3 meter from other compasses
(standard and steering)
•
Minimum 2 meters from a VHF antenna
•
Ensure the mounting location will not disrupt moving equipment
(eg.
Radar)
•
Do NOT install near ferrous metals
or anything that can create a magnetic field such as: magnetized
materials, electric motors, electronic equipment, engines,
generators, power/ignition cables, and batteries.
•
Do not install within a steel/ magnetic container
, including
not within the hull of a steel boat/vehicle
•
With the correct orientation
. AS07-N2K has two raised lines
on the tube, the center point of these should be pointed straight
forward, towards the front of the boat, as illustrated.
• If this is not possible, you can configure this adjustment to
+90 to
–
90 degrees using the Windows configuration tool. (See
the Configuration chapter for more details)
Figure 1 AS07-N2K Dimensions
