background image

 12

5.  The charger indicator glows green when the battery is fully charged. Please remove 

the battery then.   

 

 

 

 

 

Antenna 

Stubby antennas are ideal for communication within limited range. Fine and long antennas 

optimizes communication coverage, ideal when the radio is worn on the belt because they 

are flexible and soft. 

Rainy days or forest locations may narrow your communication range, please repare in 

advance to avoid potential inconvenience. 

 

Accessory Installation

 

Battery

 

Attaching the battery 

1. Hold the top part of the radio’s body, and slide the battery latch in the direction of arrow 

① 

Then lift the rear cover and remove it from the radio’s body, as shown in Figure 1.   

 

 

Figure 1 

2.  Align the discharging terminal of the battery with the radio’s charging piece, and insert 

the tab at the top of the battery into the slot at the top of the radio’s body. Then press the 

bottom of the battery towards the radio, until the battery is securely inserted into the 

battery slot, as shown in Figure 2. Note: If the battery is not well locked, please remove 

the battery and attach it again.   

Charger LED 

Status 

Steady Orange 

Battery is charging 

Steady Green 

Battery is fully charged 

Summary of Contents for QP350

























Reviews: