26
When the BCL feature is enabled, you are prevented from transmitting on a channel that
is already in use. Press the PTT on a channel that is already in use, the radio will sound
alert tone and turn back to the receive mode.
Carrier: If BCL is set on the current channel, press the PTT while the channel is already in
use, the radio will sound beeps.
CTCSS/CDCSS: If CTCSS/CDCSS and BCL are set on the current channel, press the
PTT while the channel is already in use, the radio will sound beeps without
transmission.
Optional Signaling: If 2-Tone/MDC1200
signaling and BCL are set on the current channel,
press the PTT while the channel is already in use, the radio will sound beeps
without transmission.
Battery Save
When enabled, the Battery Save feature is automatically activated once the situation that
no activity on the channel and no operation performed, lasts for 12 seconds.
Pressing any key or receiving a signal will restore the radio to normal operation and exit
from Battery Save.
S
2
Double Saving
TM
Mode
When S
2
Double Saving Mode is enabled, and the radio transmit power will automatic
change. The battery will have a more long operation time.
Low Battery Alert
When enabled, and when the battery level run low. the red LED flashes and the radio
emits three beeps at every 30 seconds, to alert the user to recharge the battery.
Scrambler
This feature means that your conversation is secrecy.
If Scrambler is set on the current channel, only the radio setted Scrambler active can
receive you, the radio not setted only get a noise voice.
Compander
Companding is a feature that allows further improvement of voice quality. It compresses
your voice at transmission, and expands it when receiving while simultaneously reducing
extraneous noise. However, to enjoy this benefit, all transmitting and receiving radios
