8
9. LED
Indicator
( Details as following table)
10. Radio On-Off/Volume Control Knob
11. Accessory Jack
12. Battery Latch
13. Belt Clip
14. Accessory cover
15. Battery
16. Charge terminal
The functions of the LEDs and beeps Table
Power On
The green LED flashes once, and
radio beeps ( if programmed active )
Transmitting
LED glows red
Receiving
LED glows green when carrier
presents.
Scanning
Green LED flashes once every 1
second.
Encoding (DTMF/PTT ID/2-Tone/MDC1200)
1) LED glows red while transmitting;
2)
LED glows orange when
transmission ends.
Decoding (2-Tone/MDC1200)
Orange LED flashes after the
signaling is successfully decoded.
Function Key Press
One beep to enable, two beeps to
disable.
Select Power Level
1W: One beep is heard;
2W: Two beeps are heard;
5W: Three beeps are heard.
Low Battery Alert
LED flashes red, and radio sounds
three beeps every 30 seconds.
