25
Intrinsically Programmable Operations
The feature allows for more efficient use of the radio, Those functions need to be
programmed by your dealer.
CTCSS/CDCSS
If CTCSS/CDCSS is set on the current channel, causes a CTCSS/CDCSS match to be
required on an incoming signal for radio to unmute. The radio will not unmute to an
incoming call that with invalid CTCSS/CDCSS.
This feature does not mean that your conversation will not be heard by others. Radios that
set with the same CTCSS/CDCSS, or no CTCSS/CDCSS, can receive from you.
Signaling Logic
CTCSS/CDCSS “AND” / “OR” 2-Tone/MDC1200
“AND: Radio unmute upon both the CTCSS/CDCSS and 2-Tone/MDC1200
conditions are
matched.
“OR”: Radio unmute upon either the CTCSS/CDCSS or 2-Tone/MDC1200
condition is
matched.
PTT ID
Your dealer may configure whether to transmit Connect ID (BOT ID) or Disconnect ID
(EOT ID), when connecting or disconnecting a repeater or telephone system.
If the BOT ID is selected, press the PTT to transmit BOT ID.
If the EOT ID is selected, release the PTT to transmit EOT ID.
If Both is selected, transmit both BOT ID upon each press of PTT, and EOT ID upon each
release of PTT.
Time-out Timer (TOT)
The feature allows for more efficient use of channels by limiting the maximum time of each
transmission. Once a continuous transmission exceeds the preset time, the transmission
is automatically terminated and alert tone is heard. Release the PTT to cancel the alert
tone.
Your dealer may program the alert tone sounds before the TOT timer nearly expires.
Busy Channel Lockout (BCL)
