Quantum ValueLoader DLT VS160, User Manual

Page: 30 / 88

Chapter 1 Installing the ValueLoader
Preparing the Host and Verifying the Connection
16 ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
Tape Drive Device Driver (Windows 2000) 1
1 Make sure that you are logged on to the host server with
Administrator privileges.
2 Right-click the
My Computer
icon on the Windows desktop, click
Manage
, then click
Device Manager
.
3 The tape drive should be listed under the
? Other Devices
item as:
• For VS80 ValueLoader —
BNCHMARK VS640 SCSI Sequential
Device
• For VS160 ValueLoader —
QUANTUM DLT VS160 SCSI Sequential
Device
4 For the VS80 ValueLoader, right-click the
BNCHARK VS640 SCSI
Sequential Device
listing, click
Uninstall
, and then click the
OK
button
to confirm that you want to remove the device.
For the VS160 ValueLoader, right-click the
QUANTUM DLT VS160 SCSI
Sequential Device
listing, click
Uninstall
, and then click the
OK
button
to confirm that you want to remove the device.
5 Click the
Action
button in the upper-left corner of the Computer
Management dialog box.
6 Click
Scan for Hardware Changes
. Windows 2000 scans for the drive.
The drive appears under
? Other Devices
again.
7 For the VS80 ValueLoader, right-click the
BNCHMARK VS640 SCSI
Sequential Device
listing and click
Properties
.
For the VS160 ValueLoader, right-click the
QUANTUM DLT VS160 SCSI
Sequential Device
listing and click
Properties
.
8 Select the
Drivers
tab.
9 Click the
Reinstall Driver
or
Update Driver
button.
10 When the Upgrade Device Driver Wizard appears, click
Next
.
11 Click
Tape Drives
and then click
Next
.
Note: The following instructions assume that you have downloaded
the appropriate device drivers from
www.Quantum.com
and
have saved them in a known location on your computer
system.