![background image](http://html1.mh-extra.com/html/quantum/superloader-dlt/superloader-dlt_user-manual_4062204086.webp)
Chapter 3 Media Changer Commands
Mode Select (6) / (10) Command (15h / 55h)
68
Quantum ATL SuperLoader Software Interface Guide
Table 27 Mode
Select (6)/(10)
Command Descriptor
Mode Parameter
List
3
The following figure shows the format of the Mode Parameter List
that is passed by the initiator to the media changer during the
command’s DATA OUT phase.
Figure 33 Mode
Select (6) Mode
Parameter List
Field Name
Description
PF
Page Format. The Page Format bit indicates that the
data sent by the host after the MODE SELECT header
and block descriptors complies with the definition of
pages in the SCSI-2 specification. The SCSI-1 format
will not be implemented so this bit must be set to 1. It
is an ILLEGAL REQUEST to have page parameters
while the PF bit is 0.
SP
Save Parameters. Must be 0. If set, this bit instructs the
SuperLoader to save all savable pages, and this is not
supported.
Bit
Byte
7
6
5
4
3
2
1
0
0 - 3
Mode Parameter Header
4 - 11
Mode Parameter Block Descriptor (Optional)
4 – 11 or
12 - n
Page(s) (Optional)
Summary of Contents for SuperLoader DLT
Page 1: ...ATL SuperLoader DLT and ATL SuperLoader LTO Software Interface Guide 81 60220 01 A02...
Page 18: ...Preface Document Conventions xviii Quantum ATL SuperLoader Software Interface Guide...
Page 44: ...Chapter 2 Messages Supported SCSI Messages 26 Quantum ATL SuperLoader Software Interface Guide...
Page 196: ...Index 178 Quantum ATL SuperLoader Software Interface Guide...