![background image](http://html1.mh-extra.com/html/quantum/superloader-dlt/superloader-dlt_user-manual_4062204165.webp)
Chapter 3 Media Changer Commands
Report Device Identifier Command (A3h)
Quantum ATL SuperLoader Software Interface Guide
147
Table 62 Report
Device Identifier
Parameter Data
Field
Description
Identifier
Length
Specifies the length in bytes of the Identifier field. If the
Allocation Length field in the CDB is too small to transfer
all of the identifier, the length is not adjusted to reflect the
truncation. The identifier length is initially equal to zero,
and is changed only by a successful SET DEVICE
IDENTIFIER command.
Identifier
The value reported is the last value written by a
successful SET DEVICE IDENTIFIER command. The
value of the identifier is changed only by a successful SET
DEVICE IDENTIFIER command. The identifier value
persists through resets, and power cycles.
Summary of Contents for SuperLoader DLT
Page 1: ...ATL SuperLoader DLT and ATL SuperLoader LTO Software Interface Guide 81 60220 01 A02...
Page 18: ...Preface Document Conventions xviii Quantum ATL SuperLoader Software Interface Guide...
Page 44: ...Chapter 2 Messages Supported SCSI Messages 26 Quantum ATL SuperLoader Software Interface Guide...
Page 196: ...Index 178 Quantum ATL SuperLoader Software Interface Guide...