![background image](http://html1.mh-extra.com/html/quantum/sun-storedge-l25/sun-storedge-l25_user-manual_3520572118.webp)
Chapter 6 Running the Demonstration Programs
Running the Demo 4 Program
102
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
Running the Demo 4 Program
6
The
Demo 4
program causes the robot to pick a randomly selected
cartridge from its magazine slot and place it in another randomly
selected magazine slot.
To run the
Demo 4
program:
1
Verify that at least:
• Two library modules are installed in the stack
• One magazine is installed in each library module
• One cartridge is present
2
Access the
Demo Programs
screen (see
3
Press the
Up
or
Down
buttons to select
Demo 4
.
4
Press
Select
.
The
Demo 4
program starts. This program continues until you
press the
Stop
button.
5
To stop the program, press
Stop
.
The GUI displays a status screen listing the demonstration
program number, the number of cycles completed, and the
status of the test: pass or fail.
6
Press
Back
to return to the
Demo Programs
screen.
Note:
This program is for stacked libraries only.
Summary of Contents for Sun StorEdge L25
Page 10: ...Figures x Sun StorEdge L25 Tape Library and Sun StorEdge L100 Tape Library User s Guide...
Page 12: ...Tables xii Sun StorEdge L25 Tape Library and Sun StorEdge L100 Tape Library User s Guide...
Page 192: ...Index 176 Sun StorEdge L25 Tape Library and Sun StorEdge L100 Tape Library User s Guide...