background image

ii

Replacing a Controller

StorNext QM1200, QS1200 or QS2400 Base System, Replacing a Controller, 6-68012-01 Rev B, April 2015, Product of 

USA.
Quantum Corporation provides this publication “as is” without warranty of any kind, either express or implied, including 

but not limited to the implied warranties of merchantability or fitness for a particular purpose. Quantum Corporation 

may revise this publication from time to time without notice.

COPYRIGHT STATEMENT

© 2015 Quantum Corporation. All rights reserved.
Your right to copy this manual is limited by copyright law. Making copies or adaptations without prior written 

authorization of Quantum Corporation is prohibited by law and constitutes a punishable violation of the law.

TRADEMARK STATEMENT

Quantum, the Quantum Logo, Backup. Recovery. Archive. It's What We Do., Be Certain, Be Quantum Certain, DLT, the DLT 

Logo, DLTSage, DLTtape, the DLTtape Logo, DXi, DXi Accent, Dynamic Powerdown, FastSense, FlexLink, GoProtect, 

GoVault, iLayer, Lattus, MediaShield, Optyon, Pocket-sized., Well-armored., Preserving the World's Most Important Data. 

Yours., Q-Cloud, Quantum Certain, Quantum Certainty, Quantum vmPRO, Scalar, SDLT, SiteCare, SmartVerify, 

StorageCare, StorNext, Super DLTtape, SuperLoader, and Vision are either registered trademarks or trademarks of 

Quantum Corporation and its affiliates in the United States and/or other countries. All other trademarks are the property 

of their respective owners.
Products mentioned herein are for identification purposes only and may be registered trademarks or trademarks of their 

respective companies. All other brand names or trademarks are the property of their respective owners.
Quantum specifications are subject to change.

Summary of Contents for StorNext QM1200













Reviews: