background image

© May 2006, ADIC 

3

37231

CFL was not using the type field to determine if the log entry was owned by SOIP2.

36626

If there was no memory for a playback copy buffer, CFL was not printing an error 
message. 

36615

The 

setTimeHost 

command does not clear input string prior to new input 

39587

SCSI Over IP: “No Device 6.14.21” message is displayed on SNC when an inquiry 
command is send to an invalid device.

39534

Need to properly show serial numbers of targets in the 

mapShowDatabase 

output

39388

SNC 4000 not properly logging in to McData switch, which prevents the host from 
discovering the Scalar 24 .

38542

uaQueue sending old UAs to host after PLOGI event.

38186

Drive dump was failing on the SNC 5101 and SNC 4000. 

37913

CFL was throwing an exception when the log wrapped.

37811

mkRelease doesn’t stop if build component is unsuccessful.

37359

Add paCommandFlowLogEnabled variable to SANMgr MIB.

37237

When testing Enhanced Data Streaming, memory that was allocated by dsStart was 
not released after dsStop.

37231

CFL was not using the type field to determine if the log entry was owned by SOIP2.

36626

If there was no memory for a playback copy buffer, CFL was not printing an error 
message. 

36615

The 

setTimeHost 

command does not clear input string prior to new input 

36295

snmpSet error on AMC View Event Log with viewing level =0 (All Events).

36216

Command Flow Logging: Events for failed medium changer are not available if 
changer doesn’t respond when SCSI Channel is rescanned.

36157

When testing Enhanced Data Streaming, the test report was displaying MBPS 
instead of the number of Tape Writes completed.

36156

When testing Enhanced Data Streaming using two Fibre Channel ports concurrently 
and with the SNC in Target mode, tape test errors were recorded.

36085

When the copy test tool or serverless backup sends an XCOPY command, the 
Command Flow Logging (CFL) feature was not displaying a completion status. 

36075

Request to pull SNC command logs using AMC interface.

35664

Want ability to reset a specified SCSI bus from the CLI and SNMP.

Change 

Request 

Number

Description

Reviews: