Q
UANTUM
S
CALAR
I
6000 & S
AFE
N
ET
K
EY
S
ECURE
Q
UICK
S
TART
G
UIDE
6
-
1 stop bit
-
Hardware flow control
11
The initialization process begins after you power up the KeySecure.
System starting up...
Release 6.0.0
Are you ready to begin setup? (y/halt): y
Enter
y
to continue or
halt
to abort the process. Entering
halt
shuts down the machine.
12
Create the admin account.
You use this account to log in to the Management Console and the CLI.
You can modify this account and create additional users later.
For further administrative access to this device you will
need an administrative account. An account called 'admin' will
be created and will be the primary administrative account.
Please enter a password for the admin account:
Please enter password again:
User 'admin' has been created.
Enter and confirm the password. The system creates the user if the password entries are successful.
W
ARNING
:
Remember the admin password. An administrator password can only be reset by another
administrator with the appropriate access privileges. This is a fundamental security precaution.
If all
administrator passwords are lost, you cannot re-configure the KeySecure. All keys and configuration
data will be unrecoverable and you must return the device to have the software reinstalled.
13
Set the system time zone, date, and time.
Please select your time zone:
1: Samoa Time Zone
2: Hawaii Time Zone
...
Enter time zone [5]:
Enter the local date (MM/DD/YYYY) [03/02/2011]:
Enter the local time (HH:MM:SS) [15:40:23]:
The time and date have now been set.
You can view the full list of time zones on the console. The script displays default values for the time
zone, date, and time in brackets. You can accept those defaults by pressing Enter, or you can enter
specific values.
14
Set the network addresses
for the KeySecure.
To support network based configuration, a single IP address
is needed to bind to. Once an IP address is provided all further
configuration can be done remotely using SSH or using the Web
administration site.
Note that this will configure Ethernet #1 on your device.
Please enter the following information:
