Q
UANTUM
S
CALAR
I
6000 & S
AFE
N
ET
K
EY
S
ECURE
Q
UICK
S
TART
G
UIDE
24
Step 9: Configure Library Access to the SafeNet KeySecure
To configure the library access to the SafeNet KeySecure:
1
From the menu bar, click
Setup
>
Encryption
>
Server Configuration
.
The
EKM Server Configuration
dialog box appears.
2
From the
Key Server Type
drop-down list, select
KMIP Key Manager
.
3
Fill in the rest of the fields as follows:
For the server IP address, you can enter the following:
-
IPv4 address
-
IPv6 address—if IPv6 is configured
-
Domain name—if DNS is configured
Note:
Assign your SafeNet KeySecures on this screen in the order in which you want failover to
occur. Server 1 is the primary server; Server 2 is the secondary server; and so on. For an initial key
request, the library tries Server 1 (the primary server) first. If Server 1 is not available to perform a key
request, the library tries Server 2. If server 2 is not available, the library will try Server 3, and so on, in
order, until it finds a server that can perform the request. Once found, this server remains the active
server until it fails a key request or the library is rebooted. At that point, the library starts over and uses
Server 1 for key requests. If Server 1 is not available, it will try Server 2, and so on.
