![background image](http://html2.mh-extra.com/html/quantum/scalar-i500/scalar-i500_reference-manual_3562389089.webp)
Scalar i500 Basic SNMP Reference Guide
83
SNMP Traps
This section describes the basic set of Simple Network Management Protocol (SNMP) system status traps
issued by the library. Traps pertain to the entire library, not specific modules or partitions.
Traps defined in the Tape Library Management Information Base (MIB) are issued with enterprise OID
“Quantum Tape Library MIB”, which resolves to 1.3.6.1.4.1.3764.1.10.10.
Note
The Scalar i500 only supports SNMP v1 traps as defined by RFC 1157.
Table 1
Status Traps
Trap ID
Trap
Description
101
startupSequenceCompleted
Startup Sequence Completed
Indicates that the library startup sequence has
completed.
102
shutdownSequenceInitiated
Shutdown Sequence Initiated
Indicates that the library has started its shutdown
sequence.
104
phModuleDoorStatusChange
Physical Library Door Status Change
Indicates that a library access door has been opened,
closed, locked, or unlocked, interrupting or enabling
power to the robot.
105
ieDoorStatusChange
I/E Door Status Change
Indicates that an I/E station door has been opened or
closed.
106
roboticsReady
Robotics Ready
Indicates that the library’s robotics system has
transitioned from a “not ready” to “ready” state.
Traps 106 and 107 may occur as part of a startup or
shutdown procedure. If they occur at another time, a
library door may be open.
a. The library issues a trap whenever the aggregate state of one of the Reliability, Availability, and Serviceability (RAS) status
groups changes. Listening for these traps (rather than querying for them) is the preferred method of monitoring the
health of the library.
Summary of Contents for Scalar i500
