12
MIB Variables - IPv6 Information
Numerical syntax
: Integer (32 bit)
Base syntax
: INTEGER
Composed syntax
: INTEGER
Status
: current
Max access
: read-only
Value list
:
1: up(1)
2: down(2)
3: noIfIdentifier(3)
4: unknown(4)
5: notPresent(5)
Description
:The current operational state of the interface. The noIfIdentifier(3) state indicates that no valid
Interface Identifier is assigned to the interface. This state usually indicates that the link-local interface
address failed Duplicate Address Detection.
•
If ipv6IfAdminStatus is down(2) then ipv6IfOperStatus should be down(2).
•
If ipv6IfAdminStatus is changed to up(1) then ipv6IfOperStatus should:
•
change to up(1) if the interface is ready to transmit and receive network traffic;
•
remain in the down(2) or noIfIdentifier(3) state if and only if there is a fault that prevents it from
going to the up(1) state;
•
remain in the notPresent(5) state if the interface has missing (typically, lower layer)
components.
Summary of Contents for Scalar i500
