manualshive.com logo in svg

Quantum ROLLERSHADE HARDWARE SYSTEM, Installation Manual

Share
Download
Quantum ROLLERSHADE HARDWARE SYSTEM Installation Manual Download Page 7

PAGE 7

Q U A N T U M   I N S T A L L A T I O N

INSTALLATION - HEADBOX SYSTEM

1. Fix headbox back plate to wall 

by drilling through extrusion 

and slide brackets into keyway. 

Tighten grubscrew.

3. Clip headbox front plate inside  

keyway at the top of the     

back plate.

NOTE:  End cap removed for 

demonstration only.

2. Slide end caps into the 

    headbox back plate.

4. Clip headbox front plate into 

    place to secure the endcaps.

1. Level the side guiding channel

 

flush with the headbox end 

cap. Mark this position.

3. Fix the lower clip - and clips  

    at 1000 mm intervals - before  

    installing the channel. 

2.  Fix the top clip with a distance 

max 7.5mm  from the bottom 

of the headbox end cap.  

INSTALLATION - SIDE CHANNELS

4. Place the bottom rail into the 

side guiding channel. Snap 

and remove tab on chain 

drive end.

5. Snap channel into clips.

Tab

Summary of Contents for ROLLERSHADE HARDWARE SYSTEM









Reviews:

No comments

Brands by name

Popular brands

Load more brands