PAGE 6
1. Slide the end cap towards
you.
2. Unfasten the locking ring.
Slide a screw driver between
locking ring and bracket
and push the idle end in the
aligner direction.
3. Move the blind downwards
out of the bracket. Pull the
aligner or connector out of
the idle end.
Q U A N T U M I N S T A L L A T I O N
REMOVAL - LINKED BLINDS
1. Unfasten the locking ring.
2. Slide up the chain drive.
3. Push blind in the idle end
direction (2) and lower blind
to remove from bracket (3).
Q U A N T U M I N S T A L L A T I O N
REMOVAL - SPRING BOOSTER
1
3
2
1
2
2
1
2
1
1. Place the idle end into the
bracket. Push blind in the idle
end direction (1) and lift blind
up (2).
2. Lift the blind up until chain
drive clicks in place (3).
Q U A N T U M I N S T A L L A T I O N
INSTALLATION - SPRING BOOSTER
3
click
3. Fix the blind by turning the
locking ring against the idle
end.
