Quantum QW-400 Series, Installation And Operation Manual

Page: 41 / 44

Model QW-400 Vertical Wall Frame
A complete series of inspections and functional checks was conducted at the
time of installation to insure proper operation of the system. The following in-
spection and adjustment procedures are recommended to maintain the system
in its original operating condition.
•
Check for evidence of loose hardware or loose wires.
•
Verify that all ground conductors are properly and securely installed and
free of corrosion or damage.
•
Check all electrical cabling and wiring for wear and fraying.
•
Check all bearings and bearing surfaces for cleanliness and corrosion.
• Conduct a general inspection for worn or damaged parts.
•
Visually inspect for wear and cleanliness.
REPLACEMENT PARTS AND ORDERING INFORMATION
Table 1 below provides a list of replaceable parts for the Vertical Wall Frame.
See Figures 11 and 12 for locations of replaceable parts.
Chapter 5 Maintenance
28
ITEM DESCRIPTION PART NUMBER QTY USED
IN SYSTEM
1 Fail-Safe Brake EL80-002 1
2 12” Control Handle Retractable
Coil Cord EL75-001 1
3 24-Volt Power Cable EL75-004 25 feet
4 Receptor Bearing Guides ME30-008 4
5 Front Cover (Phenolic) ME31-004 1
6 Gray Pushbutton Switch EL50-002 1
Table 1. Replaceable Parts