Quantum QW-400 Series, Installation And Operation Manual

Page: 40 / 44

Model QW-400 Vertical Wall Frame
OVERVIEW
The Vertical Wall Frame will function reliably when maintained according to the in-
structions provided in this chapter.
WARNING! Only properly trained service personnel should se
WARNING! Only properly trained service personnel should se
WARNING! Only properly trained service personnel should se r-
r-
r-
vice or maintain this equipment. Failure to follow manufa
vice or maintain this equipment. Failure to follow manufa vice or maintain this equipment. Failure to follow manufa
c-
c- c-
turer's or service personnel's recommendations may result in s
turer's or service personnel's recommendations may result in s turer's or service personnel's recommendations may result in s
e-
e- e-
r r r i i i ous injury. ous injury. ous injury.
USER MAINTENANCE
CAUTION! Never use abrasive polish on this equipment. CAUTION! Never use abrasive polish on this equipment. CAUTION! Never use abrasive polish on this equipment.
The equipment user is responsible for the basic cleanliness of the equipment.
On a regular basis, the Vertical Wall Frame’s Front Cover surface should be
wiped clean. Painted metal surfaces should be cleaned using a clean cloth
slightly moistened in warm soapy water (use mild soap). Wipe with a clean wet
cloth.
PLANNED MAINTENANCE
Routine inspection and maintenance of the Vertical Wall Frame should be per-
formed by qualified service personnel on an annual basis.
WARNING! Personnel engaged in maintenance activities should
WARNING! Personnel engaged in maintenance activities should
WARNING! Personnel engaged in maintenance activities should
exercise
exercise exercise
normal caution and care while working with electro
normal caution and care while working with electro normal caution and care while working with electro
-
- -
mechanical equipment. Before removing or opening any electr
mechanical equipment. Before removing or opening any electr mechanical equipment. Before removing or opening any electr
i-
i- i-
cal power panels or covers, verify that the incoming power su cal power panels or covers, verify that the incoming power su cal power panels or covers, verify that the incoming power su p- p- p-
ply is turned OFF. In the event maintenance procedures require ply is turned OFF. In the event maintenance procedures require ply is turned OFF. In the event maintenance procedures require
power to be supplied to the unit, extreme care MUST be exe
power to be supplied to the unit, extreme care MUST be exe
power to be supplied to the unit, extreme care MUST be exe r-
r-
r-
cised to insure the safety of service or other personnel in the
cised to insure the safety of service or other personnel in the
cised to insure the safety of service or other personnel in the
area. Verify that the equipment is properly grounded before a
area. Verify that the equipment is properly grounded before a area. Verify that the equipment is properly grounded before a
t-
t- t-
tempting any electrical operation.
tempting any electrical operation. tempting any electrical operation.
27
Chapter 5 Maintenance