manualshive.com logo in svg

Quantum Quantum Atlas 10K II 9.2/18.4/36.7/73.4 GB, Product Manual


Share
Download
background image

Contents

vi

Quantum Atlas 10K II Ultra 160/m SCSI Hard Disk Drives

5.29  RECEIVE DIAGNOSTIC RESULTS Command(1Ch) ....................................................................................... 5-157

5.29.1  Supported Diagnostics Pages Page (00h) .......................................................................................... 5-159
5.29.2  Translate Address Page (40h) .............................................................................................................. 5-160

5.30  RELEASE (6) Command (17h)....................................................................................................................... 5-163
5.31  RELEASE (10) Command (57h)..................................................................................................................... 5-165
5.32  REPORT DEVICE IDENTIFIER Command........................................................................................................ 5-167
5.33  REPORT LUNS Command (0Ah).................................................................................................................... 5-169
5.34  REQUEST SENSE Command (03h) ................................................................................................................ 5-171

5.34.1  Sense Data Availability.......................................................................................................................... 5-171
5.34.2  Clearing Sense Data............................................................................................................................... 5-172
5.34.3   Status Reporting................................................................................................................................... 5-172
5.34.4   Sense Data Format for Error Code 70h and Error Code 71h........................................................... 5-172

5.35  RESERVE (6) Command (16h)....................................................................................................................... 5-191
5.36  RESERVE (10) Command (56h) .................................................................................................................... 5-193
5.37  REZERO UNIT Command (01h)..................................................................................................................... 5-197
5.38  SEEK (6) Command (0Bh).............................................................................................................................. 5-199
5.39  SEEK (10) Command (2Bh) ........................................................................................................................... 5-201
5.40  SEND DIAGNOSTIC Command (1Dh)........................................................................................................... 5-203

5.40.1  Supported Diagnostic Page List........................................................................................................... 5-204
5.40.2  Translate Address Page......................................................................................................................... 5-204

5.41  SET DEVICE IDENTIFIER Command ............................................................................................................... 5-205
5.42  START STOP UNIT Command (1Bh).............................................................................................................. 5-207
5.43  SYNCHRONIZE CACHE Command (35h)...................................................................................................... 5-209
5.44  TEST UNIT READY Command (00h).............................................................................................................. 5-211
5.45  VERIFY Command (2Fh)................................................................................................................................ 5-213
5.46  WRITE (6) Command (0Ah)........................................................................................................................... 5-213
5.47  WRITE (10) Command (2Ah) ........................................................................................................................ 5-217
5.48  WRITE AND VERIFY Command (2Eh)........................................................................................................... 5-219
5.49  WRITE BUFFER Command (3Bh)................................................................................................................... 5-221
5.50  WRITE LONG Command (3Fh)...................................................................................................................... 5-223
5.51  WRITE SAME Command (41h)...................................................................................................................... 5-225
5.52  WRITE SKIP MASK Command (EAh)............................................................................................................. 5-227
5.53  XDREAD (10) Command (52h)..................................................................................................................... 5-229
5.54  XDWRITE (10) Command (50h) ................................................................................................................... 5-231
5.55  XPWRITE (10) Command (51h).................................................................................................................... 5-233

Chapter 6  FEATURE DESCRIPTIONS

6.1  Key Features............................................................................................................................................................6-1
6.2  Prefetch ...................................................................................................................................................................6-2
6.3  Write-Back Caching ...............................................................................................................................................6-2
6.4  Zero Latency READ/WRITE.....................................................................................................................................6-3
6.5  Disconnect-Reconnect..........................................................................................................................................6-3
6.6  Track and Cylinder Skewing .................................................................................................................................6-3
6.7  Average Access Time.............................................................................................................................................6-3
6.8  Embedded Servo System ......................................................................................................................................6-4
6.9  Data Integrity and Security ...................................................................................................................................6-4

6.9.1  Media Error Protection...................................................................................................................................6-4
6.9.2  Transfer Error Protection................................................................................................................................6-4

Summary of Contents for Quantum Atlas 10K II 9.2/18.4/36.7/73.4 GB




















































































































































































































































































































































































Reviews:

No comments

Related manuals for Quantum Atlas 10K II 9.2/18.4/36.7/73.4 GB

NEC S2500 User Manual preview
S2500
Brand: NEC Pages: 106
Eastwood 31554 Instructions Manual preview
31554
Brand: Eastwood Pages: 8
EAST OAK PTC23002 Owner'S Manual preview
PTC23002
Brand: EAST OAK Pages: 11
RAID Falcon 24-Bay Installation And Hardware Reference Manual preview
Falcon 24-Bay
Brand: RAID Pages: 108
Naterial OCEAN SIDE 8435059720210 User Manual preview
OCEAN SIDE 8435059720210
Brand: Naterial Pages: 28
U-Line H-10801 Instructions Manual preview
H-10801
Brand: U-Line Pages: 6
IBM H5S Setup, Operator, And Service Manual preview
H5S
Brand: IBM Pages: 149
LaCie 301273 User Manual preview
301273
Brand: LaCie Pages: 27
EMC CLARiiON CX4-120 Setup Manual preview
CLARiiON CX4-120
Brand: EMC Pages: 62
Seagate MEDALIST 1270 Installation Manual preview
MEDALIST 1270
Brand: Seagate Pages: 36
WiebeTech UltraDock v5 User Manual preview
UltraDock v5
Brand: WiebeTech Pages: 8
Yardmaster 1013 TYZ Instruction Manual preview
1013 TYZ
Brand: Yardmaster Pages: 28
QNAP TS-h2483XU-RP Series Quick Installation Manual preview
TS-h2483XU-RP Series
Brand: QNAP Pages: 12
Palram Skylight Shed-6x5 Assembly Instructions Manual preview
Skylight Shed-6x5
Brand: Palram Pages: 56
myToys Werkbank Assembly Instructions preview
Werkbank
Brand: myToys Pages: 4
Edsal Muscle Rack URWB-3 Quick Start Manual preview
Muscle Rack URWB-3
Brand: Edsal Pages: 2
Sony USM32A, USM64A, USM128A, USM256A Operating Instructions preview
USM32A, USM64A, USM128A, USM256A
Brand: Sony Pages: 2
Sony USM1GJ Operating Instructions preview
USM1GJ
Brand: Sony Pages: 2

Brands by name

Popular brands

Load more brands