Quantum QT-710, Installation And Operation Manual

Page: 36 / 46

Model QT-710/720 Radiographic Table
RECEPTOR CABINET MOTION
The Receptor Cabinet, containing the cassette tray, moves longitudinally (i.e.,
left or right). This is accomplished by unlocking (pulling up) the
Receptor
Cabinet Lock Release Lever (see Figure 13), attached to Receptor Cabinet,
and then moving the cabinet to the desired position. Pressing down the Re-
ceptor Cabinet Lock Release Lever locks the cabinet in its new position.
CASSETTE TRAY OPERATION
The Radiographic Table is equipped with either a Midwest or Poersch cassette
tray, depending on the system ordered. The following paragraphs describe the
operating instructions for each. Additional information is contained in the cas-
sette tray manufacturer’s documentation, which is shipped with the table.
Loading Cassette Tray (Midwest Type)
To load a film cassette into a “Midwest” type cassette tray, proceed as fol-
lows:
1. Pull cassette tray from Receptor Cabinet using tray handle (see Figure
14).
2. Pull back on front cassette grip (opens both grips).
Chapter 4 Operation
24
Figure 13. Receptor Cabinet Lock Release Lever
RECEPTOR CABINET LOCK
RELEASE LEVER